GREEN RHINO® EnviroHorn Sediment Drain Filter - 21kg Sediment - 100 Micron (Yellow)
The EnviroHorn Sediment Drain Filter sits inside a roadside drain (gully) and filters out sediment and debris from site run-off. The sediment is retained and the water is discharged to regulator-approved standards of 100µm.
To use the Envirohorn, the conical filter is placed inside the drain pot and the large square top is cut to size leaving a 6” collar on all sides of the drain aperture. This collar is taped down onto the road using a roll of wide insulation tape. This ensures that all run-off goes through the drain filter. If the Envirohorn fills with silt, simply empty out the collected sediment and refit the filter to the drain. Alternatively, it can be emptied while in situ by simply scooping the sediment out.
The Envirohorn is capable of collecting 21kg of Sediment before it needs emptying to be reused.
Features :
- Keeps surface water drains clean and clear
- Removes the risk of fines, clean-up costs and prosecution
- Water discharged to EA-accepted levels
- Rugged and reusable
- Install in 5 minutes
- Instructions printed on the top
Size (cm) - 25 Diameter x 40 Depth
Sediment Capacity (kg) - 21
Oil Capacity (L) - N/A
Filter - 100 Micron
Flow Rate (lpm) - 140
- Green Rhino
- Dewatering
- 140
- Drain Filter
